It is possible to scan LTE interfaces with /interface lte scan command Username used if any of the authentication protocols are active If set to yes, uses DNS recieved from LTE interface If set to yes, uses network provided APN. Parameter is available starting from RouterOS v7 and used only for MBIM modems. Password used if any of the authentication protocols are active The gateway address stays the same until the apn configuration is changed.
"p2p" sets the passthrough interface subnet as /32 and picks gateway address from 10.177.0.0/16 range. "auto" selects the smallest possible subnet to be used for the passthrough interface. Passthrough-subnet-selection ( auto / p2p Default: auto) If set to auto, then will learn MAC from first packet Interface to passthrough IP configuration (activates passthrough)
Interface on which to advertise IPv6 prefix Ip-type ( ipv4 | ipv4-ipv6 | ipv6 Default: ) LTE route by default is with distance 2 to prefer wired routes over LTE Sets distance value applied to auto created default route, if add-default-route is also selected. Whether to add default route to forward all traffic over the LTE interface.Īuthentication ( pap | chap | none Default: none)Īllowed protocol to use for authenticationĭefault-route-distance ( integer Default: 2) PLMN codesĪll network related settings are moved under profiles, starting from RouterOS 6.41 Used to lock device to specific operator full PLMN number is used for lock consisting from MCC+MNC. Select/force mode for LTE interface to operate with Max packet size that LTE interface will be able to send without packet fragmentation. Modem init string (AT command that will be executed at modem startup) LTE Frequency band used in communication LTE Bands and bandwidthsĥG NR Frequency band used in communication 5G NR Bands and bandwidths Which APN profile to use for this interface Some modems, that do not fully support this feature, will connect to the network but will not establish an IP data connection with allow-roaming set to no. Enable data roaming for connecting to other countries data-providers.
0 kommentar(er)
